You are here: Troubleshooting > Error Codes > Errors 10-19 > Error 14

Error 14: Bottom Board Thickness Fault

Variable M488

An irregularity has been detected: the thickness of the bottom board (stored in variable P758) is greater than the total thickness of the stack of timber (stored in variable P751).

What to do now

If the bottom board thickness is correct, press START to override, otherwise stop the saw by holding down the STOP button.

What to do next

Pushing the START button should allow the stack of timber to be cut. If the problem persists or if cutting looks irregular, please contact Vekta Automation for assistance immediately.