You are here: Troubleshooting > Error Codes > Errors 30-39 > Error 37

Error 37: Trench Cut Fault

Variable M679

There is an issue with the cut parameters for this trench cut. The cut width set in the file (stored in variable P431) is smaller than the diameter of the trenching tool (set in variable P692). The system is configured to generate an error when this condition is met. It is possible to change the mode to either skip this cut or perform the trench cut with the cut width set to the trenching tool diameter.

What to do now

Press the START button to continue cutting and skip current cut, otherwise stop the saw by holding down the STOP button.

What to do next

Please contact Vekta Automation for assistance.