You are here: Troubleshooting > Error Codes > Errors 40-49 > Error 42

Error 42: Clutch Trip

Variable M684

The safety torque limiting clutch on the saw has been tripped.

What to do now

Rehome the saw.

What to do next

  1. Home the saw and use Manual Mode to position the saw blade in-line with the feeder openings.
  2. Insert a piece of timber through either the infeed or the outfeed feeder and press against the lower edge of the saw blade. Using a firm push, try to move the saw into or out of a bevel. When the clutch re-engages, you should feel the resistance increase substantially.
  3. Rehome the saw before continuing.