You are here: Troubleshooting > Error Codes > Errors 40-49 > Error 43
Error 43: Waiting for Printer
The saw is fitted with a variable height P3 printer but the printer is not positioned correctly.
What to do now
E‑stop and rehome the saw.
What to do next
- Check that the printer can move up and down freely by hand when the E‑stop button is pressed.
- Check that the cables that go to the printer actuator are secure and free of dust.
- Check that the SMC LEC controller (located in the right-hand electrical cabinet, maybe behind the PC) is not showing any error.