You are here: Troubleshooting > Error Codes > Errors 50-59 > Error 51

Error 51: Outfeed Feeder Sensor Blocked

Variable M777

One or more of the three sensors in the outfeed feeder are blocked.

What to do now

Clear potential obstructions from outfeed and press START to continue, otherwise stop the saw by holding down the STOP button.

What to do next

  1. Check for a blockage (e.g. a piece of timber, timber swarf, etc.) and clear if applicable.
  2. Check that the sensors are clean - ensure there is no build-up of saw dust or ink on the lenses.