You are here: Troubleshooting > Error Codes > Errors 60-69 > Error 67
Error 67: Following Error C‑axis
The C‑axis servo motor was not able to move freely to the required position.
What to do now
Rehome the saw.
What to do next
- Open the chamber door and try to move the C‑axis by hand. The axis should move smoothly with little effort.
- Thoroughly blow down the saw head assembly and look for pieces of wood which may be jamming the motion.
- Blow out the area in the middle of the C‑axis where the cables and hoses are fed through from the bottom and the top. A build-up of dust in this area can cause this issue.