You are here: Troubleshooting > Error Codes > Errors 80-89 > Error 82

Error 82: 24V Safe Fault

Variable M106

The safety PLC has detected there is a fault with 24V SAFE rail. This could indicate a short from 24V to 24V SAFE rails or a supply fault to the 24V SAFE rail. The fault must be cleared and the safety PLC must be reset.

What to do now

E‑stop the saw, release the E‑stop button and hold down CONTROL button for at least 5 seconds then release.

What to do next

  • If the problem persists, contact Vekta Automation for assistance.