You are here: Troubleshooting > Error Codes > Errors 80-89 > Error 84

Error 84: Commissioning Mode Blade Over Speed

Variable M109

The blade has risen above 100 rpm while in commissioning mode. The saw has been shut down in case this is due to power applied to the saw blade.

What to do now

Wait for 5 seconds then attempt to re-engage the control.

What to do next

  1. Close all doors, replace all guards and deactivate commissioning mode then attempt to re-engage control.
  2. If control does not engage, please contact Vekta Automation for assistance.