You are here: Troubleshooting > Error Codes > Errors 80-89 > Error 85
Error 85: Low Air Pressure
The saw has detected that the air supply pressure is too low for normal operation.
What to do now
Hold the STOP button down and then try to rehome the saw in Manual Mode. If the saw homes correctly, try to start cutting again.
What to do next
- Confirm that the air compressor is still turned on.
- Check the air pressure gauge at the back of the saw - where the air is connected to the saw. It should be at least 70 psi.
- If the problem keeps coming up, please contact Vekta Automation for assistance.