You are here: Troubleshooting > Error Codes > Errors 90-99 > Error 90
Error 90: Printer Communication Fault
Simple is not able to communicate with the printer as expected.
What to do now
Press the START button to clear this error.
What to do next
- Try to do a Hard Reset on the plate marking control panel and wait for the printer(s) to go online again.
- Check that the Ethernet cables behind the PC are all connected.
- Check that the network switch behind the PC is powered up.
- If no printer is installed or if communications cannot be re-established, disable the printers by unchecking the Enable Print Module checkboxes on the plate marking control panel.