You are here: Troubleshooting > Error Codes > Errors 20-29 > Error 25

Error 25: B‑axis Out of Range

Variable M583

The bevel cut angle (B‑axis) exceeded the minimum allowed angle (set in variable Q574). The system is configured to change the cut angle to the minimum angle if the difference between the cut angle and the minimum angle is within the tolerance set in variable Q578. In this case the cut angle exceeded this tolerance.

What to do now

Press the START button to continue cutting and skip current cut, otherwise stop the saw by holding down the STOP button.

What to do next

Please contact Vekta Automation for assistance as the system can be configured in a few different ways in this situation.