Simple Software
Maintenance
Training
Troubleshooting
- Cutting Issues
- Optimising
- Printer
- AIT
- OFK
- Error Codes
  - Errors 0-9
    - Error 0
    - Error 1
    - Error 2
    - Error 3
    - Error 5
    - Error 6
    - Error 7
    - Error 8
    - Error 9
  - Errors 10-19
    - Error 10
    - Error 11
    - Error 12
    - Error 13
    - Error 14
    - Error 15
    - Error 16
    - Error 17
    - Error 18
    - Error 19
  - Errors 20-29
    - Error 20
    - Error 21
    - Error 26
    - Error 27
    - Error 28
    - Error 29
  - Errors 30-39
    - Error 30
    - Error 33
    - Error 34
    - Error 35
  - Errors 40-49
    - Error 41
    - Error 43
    - Error 44
    - Error 45
    - Error 46
    - Error 47
    - Error 48
    - Error 49
  - Errors 50-59
    - Error 50
    - Error 51
    - Error 52
    - Error 53
    - Error 54
    - Error 55
    - Error 56
    - Error 57
    - Error 59
  - Errors 60-69
    - Error 61
    - Error 62
    - Error 63
    - Error 64
    - Error 65
    - Error 67
    - Error 69
  - Errors 70-79
    - Error 70
    - Error 73
    - Error 74
    - Error 75
    - Error 76
    - Error 77
    - Error 78
    - Error 79
  - Errors 80-89
    - Error 80
    - Error 81
    - Error 82
    - Error 83
    - Error 84
    - Error 85
    - Error 86
    - Error 87
    - Error 88
    - Error 89
  - Errors 90-99
    - Error 90
    - Error 91
    - Error 92
    - Error 93
    - Error 94
    - Error 95
    - Error 96
    - Error 97
    - Error 98
    - Error 99
  - Errors 100-109
    - Error 100
    - Error 101
    - Error 102
    - Error 103
    - Error 104
    - Error 105
    - Error 106
    - Error 107

All Files

Inspect and replace the dust extractor bags

WHAT YOU NEED

Tools:Adjustable Spanner

Spare Parts:Dust Extractor Bags - ME1192

Safety Equipment:Standard Personal Protective Equipment

Inspection and replacement

Press the E‑stop button on the operator console.
Isolate the dust extractor .
Visually inspect the dust extractor for any signs of damage.
Shake the dust out of the top dust filter bags (if fitted).
Operate the cleaning mechanism on the side of the dust extractor to clean the cartridge filters (if fitted).
Shake the dust extractor bags to remove excess dust.
Use an air gun to blow down the dust extractor.
Unlatch the locking strap on any bag that is full and needs replacing.
If bags are filling unevenly, adjust the baffles that are used to control the dust flow to each bag:
1. Use a spanner to loosen the exterior nuts that secure the baffle inside the dust extractor above the bag.
2. Adjust to direct more or less dust into the bag in question.
3. Re-tighten the nuts to secure the baffle in place again.
Install new bags using the locking strap, making sure the new bag is in good condition.

Testing

Turn power back on for the dust extractor.
Release the E‑stop button on the dust extractor control panel.
Release the E‑stop button on the operator console.
Rehome the saw.
Using the Manual Mode window, make sure the dust extractor turns on normally and the bags are filling with air properly.