Check the reed switches on the kickoff arm

WHAT YOU NEED 

Tools:Flat Head Screwdriver

Safety Equipment:Standard Personal Protective Equipment

CAUTIONWhen using material handling in the manual mode, make sure that everything and everyone is clear of moving parts to prevent damage or injuries.

  1. Open the PEWIN32PRO program.
  2. Select Watch Window from the View drop-down menu at the top of the PEWIN32PRO window.
  3. Press the Insert key and add the KickoffExtended (M910) and KickoffRetracted (M911) variables to the Watch Window.
  4. Make sure the OFK conveyor is clear of timber or any other obstruction.
  5. In the Material Handling window, click  to extend the kickoff arm.
  6. Make sure the KickoffExtended variable changes from 0 to 1 and the reed switch closest to the conveyor lights up in red when the arm is fully extended.
  7. If required, use a flat head screwdriver to loosen the mounting screw, reposition the reed switch correctly within the groove and re-tighten the screw.
  8. Click  to retract the kickoff arm.
  9. Make sure the KickoffRetracted variable changes from 0 to 1 and the reed switch farthest from the conveyor lights up in red when the arm is fully retracted.
  10. If required, use a flat head screwdriver to loosen the mounting screw, reposition the reed switch correctly within the groove and re-tighten the screw.
  11. Make sure both reed switches are physically secure and cannot move from their set positions.