Check the side print heads are secure

WHAT YOU NEED 

Tools:Allen Key SetPhillips Head Screwdriver

Safety Equipment:Standard Personal Protective Equipment

  1. Press the E‑stop button on the operator console.
  2. Lift the printer cover.
  3. Inspect the side print head assembly for any signs of damage.
  4. Make sure the linear rail is secure and there is no side-to-side play.

  5. Make sure all bolts and screws are tight, especially the following ones:

    • the bolts holding the linear rail to the printer backing plate
    • the bolts holding the print head bracket to the linear bearing
    • the screws holding the print head plates to the print head bracket
  6. Close the printer cover.
  7. Release the E‑stop button on the operator console.