Check wear and clean the feeder encoder wheels

WHAT YOU NEED 

Tools:Security Torx Key SetWire Brush

Safety Equipment:Standard Personal Protective EquipmentSafety Gloves

Note: when a follower is fitted, a pop-up encoder is present on the outfeed feeder only.

1. Isolate the saw electrically.
2. Remove both feeder transparent covers.
3. Remove both front side feeder guards.
4. Inspect the encoder wheels for any signs of damage, significant wear or build‑up between the knurls.
5. If necessary, clean the encoder wheels with a wire brush.
6. Refit both front side feeder guards.
7. Refit both feeder transparent covers.
8. Turn on the electrical isolation switch on the front of the saw.