You are here: Troubleshooting > Error Codes > Errors 10-19 > Error 13

Error 13: Timber Thickness Out of Range

Variable M487

This error is thrown because the thickness of the timber (stored in variable P431) is not within the allowable range (set between variables P543 and P542).

What to do now

If the timber thickness is correct, press START to override, otherwise stop the saw by holding down the STOP button.

What to do next

  1. Check that the thickness of the member on the screen is correct and within the allowable range.
  2. Make sure that the 2* Thick and Rotate checkboxes on the Control Bar are NOT checked. Even if not, check and uncheck and try again.