You are here: Troubleshooting > Error Codes > Errors 60-69 > Error 67

Error 67: Following Error C‑axis

Variable M877

The C‑axis servo motor was not able to move freely to the required position.

What to do now

Rehome the saw.

What to do next

  1. Open the chamber door and try to move the C‑axis by hand. The axis should move smoothly with little effort.
  2. Thoroughly blow down the saw head assembly and look for pieces of wood which may be jamming the motion.
  3. Blow out the area in the middle of the C‑axis where the cables and hoses are fed through from the bottom and the top. A build-up of dust in this area can cause this issue.